1.	Setup your artwork with print data and cut paths.
2.	Send the artwork to the Print & Cut device for PRINTING ONLY with Crop-Cut adjustment marks added.
3.	Remove the printed graphic from the Print & Cut device.
4.	Apply a laminate film. (Fig.1)
5.	Reload the laminated print into the Print & Cut device. Align the optical Crop-Cut adjustment marks with Crop-Cut adjustment function. (Fig.2)
6.	Send CUT ONLY information to contour cut the graphics.The optical registration system automatically realigns the cutting path and compensates for skew and distortion.
7.	Weed excess vinyl from the graphic. (Fig.3)
8.	Apply transfer tape and install.

[Top]