|
| Optional Rotary Axis Unit (ZCL-40) |
| Max. angle of rotation |
± 18 x 105°(± 5000 rotations) |
| Loadable workpiece size* |
Items within the range of a 42.5 mm (1-11/16 in.) radius from the center of the rotary axis by 135 mm (5-3/8 in.) long |
| Workpiece thickness holdable by workpiece chuck |
12 to 40 mm (1/2 to 1-5/8 in.) |
| Loadable workpiece weight |
0.5 kg (1.1 lb) (Maximum workpiece moment of inertia 6 x 10-4 kgm2) |
| Control methods |
4-axis control (3-axis simultaneous control) |
| Feed rate |
11.79 rpm |
| Mechanical resolution |
0.0225 deg. |
| Dimensions |
357 (W) x 305 (D) x 129 (H) mm (14-1/16 (W) x 12 (D) x 5-1/8 (H) in.) |
| Weight |
6.2 kg (13.7 lb) |
| Included items |
Y-origin sensors (large and small), Z-origin sensor, Y-origin detection pin, center drill, live center, hexagonal wrench, cap screws (for securing Z-origin sensor), user's manual |
|
*The range that can actually be cut is limited by the amount of tool extention and interference between the loaded workpiece and the tool or spindle.
|
| Optional 3D Scanning Sensor Unit (ZSC-1) |
| Maximum scanning area |
305 (X) x 305 (Y) x 60 (Z) mm (12 (X) x 12 (Y) x 2-5/16 (Z) in.) |
| Distance from probe tip to table |
Maximum 92.4 mm (3-5/8 in.) |
| Table load capacity |
Maximum 4 kg (8.8 lb) |
| Sensor |
Type: Roland Active Piezo Sensor (RAPS)
Effective probe length: 60 mm (2-5/16 in.)
Tip bulb radius : 0.08 mm (0.00315 in.) |
| Scanning method |
Contacting, mesh-point height-sensing |
| Operating speed |
XY-axis : 15 to 30 mm/sec. (0.6 to 1.1 in./s)
Z-axis : 1 to 30 mm/sec. (0.04 to 1.1 in./s) |
unit: mm dia. = flute diameter, R = flute radius, l = flute length,
d = shank diameter, L = overall length, NT = number of flutes |
| Item |
Model |
Description |
| Square end-mills |
ZHS-100 |
High speed steel dia 1 3(l) x 6(d) x 50(L) x 2NT |
| ZHS-200 |
High speed steel dia 2 6(l) x 6(d) x 50(L) x 2NT |
| ZHS-300 |
High speed steel dia 3 10(l) x 6(d) x 50(L) x 2NT |
| ZHS-400 |
High speed steel dia 4 12(l) x 6(d) x 50(L) x 2NT |
| ZHS-500 |
High speed steel dia 5 15(l) x 6(d) x 55(L) x 2NT |
| ZHS-600 |
High speed steel dia 6 15(l) x 6(d) x 55(L) x 2NT |
| ZHS-3015 |
High speed steel dia 3 15(l) x 6(d) x 50(L) x 2NT
including 2pcs. |
| Ball end-mills |
ZCB-150 |
Cemented carbide R1.5 2.4(l) x 6(d) x 65(L) x 2NT |
| ZCB-200 |
Cemented carbide R2.0 3.2(l) x 6(d) x 70(L) x 2NT |
| ZCB-300 |
Cemented carbide R3.0 4.8(l) x 6(d) x 80(L) x 2NT |
| Collets (for end-mills) |
ZC-23 |
dia 3mm, dia 4mm, dia 5mm, dia 6mm, including 1pc.each |
| ZC-23-3 |
dia 3mm |
| ZC-23-4 |
dia 4mm |
| ZC-23-6 |
dia 6mm |
| ZC-23-3175 |
dia 3.175mm |
| ZC-23-6.35 |
dia 6.35mm |
dia = shank diameter, L = overall length, W = blade width |
Item
|
Model |
Description |
Engraving cutters
(for plastic) |
ZEC-A4013 |
Cemented carbide dia 4.36 x 165(L) x 0.127(W) |
| ZEC-A4025 |
Cemented carbide dia 4.36 x 165(L) x 0.254(W) |
| ZEC-A4051 |
Cemented carbide dia 4.36 x 165(L) x 0.508(W) |
| ZEC-A4076 |
Cemented carbide dia 4.36 x 165(L) x 0.762(W) |
Engraving cutters,
quarter round (for plastic) |
ZEC-A4013-QR |
Cemented carbide dia 4.36 x 165(L) x 0.13(W) |
| ZEC-A4025-QR |
Cemented carbide dia 4.36 x 165(L) x 0.25(W) |
| Engraving cutters, parallel (for plastic) |
ZEC-A4150 |
Cemented carbide dia 4.36 x 165(L) x 1.52(W) |
| ZEC-A4190 |
Cemented carbide dia 4.36 x 165(L) x 1.91(W) |
| ZEC-A4230 |
Cemented carbide dia 4.36 x 165(L) x 2.29(W) |
| ZEC-A4320 |
Cemented carbide dia 4.36 x 165(L) x 3.175(W) |
| ZEC-A4380 |
Cemented carbide dia 4.36 x 165(L) x 3.81(W) |
| ZEC-A4430 |
Cemented carbide dia 4.36 x 165(L) x 4.34(W) |
| Solid collet |
ZC-E436 |
dia 4.36mm |
| Adhesive sheet for securing material |
AS-10 |
210 mm x 140 mm, including 10 sheets |
|
| Item |
Model |
Description |
| Rotary axis unit |
ZCL-40 |
See the above specifications |
| 3D Scanning sensor unit |
ZSC-1 |
See the above specifications |
| Replacement spindle unit |
ZS-40 |
|
Dust box
|
ZDX-40 |
669 (W) x 769 (D) x 71 (H) mm
(26.33 (W) x 30.27 (D) x 2.8 (H) in.) |
|
| |
|
