| Optional Rotary Axis Unit (ZCL-40A) |
| Maximum angle of rotation |
± 99999.999 degrees |
X,Y, and Z operation strokes
|
271 (X) x 305 (Y) x 68 (Z) mm (10.67 (X) x 12.01 (Y) x 2.68 (Z) in.) |
| Maximum loadable workpiece size |
Items within the range of a 60 mm(2.36 in.) radius from the center of the rotary axis by 270 mm(10.7 in.)long.*3 |
| Maximum size holdable by workpiece clamp |
Thickness: 10 to 45 mm (0.39 to 1.77 in.)
Diameter: 20 to 50 mm (0.79 to 1.97 in.) |
| Loadable workpiece weight |
1kg (2.2 lb) (including clamps) |
| Feed rate |
Maximum 11.79 rpm |
| Software resolution |
0.001 degrees |
| Mechanical resolution |
0.005625 degrees/step (micro-step cotrol) |
| Dimensions |
470 (W) x 286 (D) x 115 (H) mm (18.5 (W) x 11.3 (D) x 4.53 (H) in.) |
| Weight |
7.5 kg (16.5 lb) |
| Included items |
Detection bar, detection pin, center drill, live center, cap screws, rubber cap, and user's manual |
ZCL-40A
*3 The range that can actually be cut is limited by the amount of tool extention and interference between the loaded workpiece and the tool or spindle.
| Optional 3D Scanning Sensor Unit (ZSC-1) |
| Maximum scanning area |
305 (X) x 305 (Y) x 60 (Z) mm (12 (X) x 12 (Y) x 2.36 (Z) in.) |
| Distance from probe tip to table |
Maximum 92.4 mm (3.64 in.) |
| Table load capacity |
Maximum 4 kg (8.8 lb) |
| Sensor |
Type |
Roland Active Piezo Sensor (RAPS) |
| Effective probe length |
60 mm (2.36 in.) |
| Tip bulb radius |
0.08 mm (0.00315 in.) |
| Scanning method |
Contacting, mesh-point height-sensing |
ZSC-1
| Optionally Available Items |
Model |
Description |
| Square end-mills |
ZHS-100 |
High speed steel dia 1 3(l) x 6(d) x 50(L) x 2NT |
| ZHS-200 |
High speed steel dia 2 6(l) x 6(d) x 50(L) x 2NT |
| ZHS-300 |
High speed steel dia 3 10(l) x 6(d) x 50(L) x 2NT |
| ZHS-400 |
High speed steel dia 4 12(l) x 6(d) x 50(L) x 2NT |
| ZHS-500 |
High speed steel dia 5 15(l) x 6(d) x 55(L) x 2NT |
| ZHS-600 |
High speed steel dia 6 15(l) x 6(d) x 55(L) x 2NT |
| ZHS-3015 |
High speed steel dia 3 15(l) x 6(d) x 50(L) x 2NT, including 2 pcs. |
| Ball end-mills |
ZCB-150 |
Cemented carbide R1.5 25(l) x 2.4(Lc) x 6(d) x 65(L) x 2NT |
| ZCB-200 |
Cemented carbide R2.0 25(l) x 3.2(Lc) x 6(d) x 70(L) x 2NT |
| ZCB-300 |
Cemented carbide R3.0 30(l) x 4.8(Lc) x 6(d) x 80(L) x 2NT |
| Collets (for end-mills) |
ZC-23 |
dia 3mm, dia 4mm, dia 5mm, dia 6mm, including 1pc.each |
| ZC-23-3 |
dia 3mm |
| ZC-23-4 |
dia 4mm |
| ZC-23-6 |
dia 6mm |
| ZC-23-3175 |
dia 3.175mm |
| ZC-23-6.35 |
dia 6.35mm |
Unit: mm dia. = flute diameter, R = flute radius, Lc=cutting lergth, l = flute length,
d = shank diameter, L = overall length, NT = number of flutes
| Optionally Available Items |
Model |
Description |
Engraving cutters
(for plastic) |
ZEC-A4013 |
Cemented carbide dia 4.36 x 165(L) x 0.127(W)*4 |
| ZEC-A4025 |
Cemented carbide dia 4.36 x 165(L) x 0.254(W)*4 |
| ZEC-A4051 |
Cemented carbide dia 4.36 x 165(L) x 0.508(W)*4 |
| ZEC-A4076 |
Cemented carbide dia 4.36 x 165(L) x 0.762(W)*4 |
| ZEC-100 |
Cemented carbide dia 6 x 50(L) x 0.225(W)*5 |
| Engraving cutters, quarter round (for plastic) |
ZEC-A4013-QR |
Cemented carbide dia 4.36 x 165(L) x 0.13(W)*4 |
ZEC-A4025-QR
|
Cemented carbide dia 4.36 x 165(L) x 0.25(W)*4 |
| Engraving cutters, parallel (for plastic) |
ZEC-A4150 |
Cemented carbide dia 4.36 x 165(L) x 1.52(W)*4 |
| ZEC-A4190 |
Cemented carbide dia 4.36 x 165(L) x 1.91(W)*4 |
| ZEC-A4230 |
Cemented carbide dia 4.36 x 165(L) x 2.29(W)*4 |
| ZEC-A4320 |
Cemented carbide dia 4.36 x 165(L) x 3.175(W)*4 |
| ZEC-A4380 |
Cemented carbide dia 4.36 x 165(L) x 3.81(W)*4 |
| ZEC-A4430 |
Cemented carbide dia 4.36 x 165(L) x 4.34(W)*4 |
| Solid collet |
ZC-E436 |
dia 4.36 mm |
Adhesive sheet for
securing material |
AS-10 |
210 mm x 140 mm, including 10 sheets |
dia = shank diameter, L = overall length, W = blade width
*4 Solid collet (ZC-E436) is required.
*5 Collet (ZC-23-6) is required.
| Optionally Available Items |
Model |
Description |
| Rotary axis unit |
ZCL-40A |
See the above specifications |
| 3D Scanning sensor unit |
ZSC-1 |
See the above specifications |
Replacement spindle unit
|
ZS-40 |
|
| Dust box |
ZDX-40 |
669 (W) x 769 (D) x 97 (H) mm
[26.33(W) x 30.27(D) x 3.8(H) in.] |
