| Model |
MDX-40A |
| Acceptable material |
Resins such as chemical wood and modeling wax (metal not supported) |
| X, Y, and Z operation strokes |
305 (X) x 305 (Y) x 105 (Z) mm (12 (X) x 12 (Y) x 4.13 (Z) in.) |
| Distance from collet tip to table |
Maximum 123 mm (4.84 in.) |
| Table size |
305 (W) x 305 (D) mm (12 (W) x 12 (D) in.) |
| Loadable workpiece weight |
4 kg (8.8 lb) |
| XYZ-axis drive system |
Stepping motor |
| Feed rate |
XY-axis: 7 to 3,000 mm/min. (0.28 to 118 in./m)
Z-axis: 7 to 1,800 mm/min. (0.28 to 70.8 in./m)
*2 mm/min step for 7 to 60 mm/min(0.28 to 2.36in./m)
*60 mm/min step for 60 to 3,000 mm/min(2.36 to 118in./m) |
| Software resolution |
NC-code: 0.001mm/step (0.000039 in./step)
RML-1: 0.01 mm/step (0.00039 in./step)(RML-1) |
| Mechanical resolution |
0.002 mm/step (0.000078 in./step) (micro-step control) |
| Spindle motor |
Brushless DC motor, Maximum 100 W |
| Spindle rotation |
4,500 to 15,000 rpm |
| Tool chuck |
Collet method |
| Interface |
USB*1 (compliant with Universal Serial Bus Specification Revision 1.1) |
| Control command sets |
NC-code, RML-1 |
| Power requirements |
AC100 to 240 ±10%, 2.1 A,
50/60 Hz (Over voltage category II, IEC 60664-1) |
| Power consumption |
Approx. 210 W |
| Acoustic noise level |
No-load operation: 56 dB (A) or less, Standby: 42 dB (A) or less |
| Dimensions |
669 (W) x 760 (D) x 554 (H) mm [26.4 (W) x 30 (D) x 21.9 (H) in.] |
| Weight |
65 kg (144 lb) |
| Environment |
Temperature: 5 to 40°C (41 to 104°F)
Humidity: 35 to 80% (no condensation) |
Nonconductive pollution degree
|
2 (as specified by IEC 60664-1) |
| Included items |
Power cord, USB cable, collet (ZC-23-6), Z0 sensor, hexagonal wrench,
hexagonal screw drivers, spanners, Roland Software Package CD-ROM,
SRP Player CD-ROM, user's manual, SRP Player installation and setup guide |
