|
| Model |
EGX-30 |
| Table |
305 mm (X) x 205 mm (Y) (12 in. x 8-1/16 in.) |
| Max. operation area |
305 mm (X) x 205 mm (Y) (12 in. x 8-1/16 in.) |
| Feed rate |
X, Y-axis: Max. 3.0 m (118-1/16 in.)/min. (50 mm (1-15/16 in.)/sec.) |
| Mechanical resolution |
0.01 mm (0.000394 in.)/step 0.00125 mm (0.0000492 in.)/step ( micro-step control ) |
| Software resolution |
0.01 mm (0.000394 in.)/step |
| Distance accuracy |
Whichever the greater value of 0.1 mm ( 0.00394 in.) or 0.5% of moving distance |
| Right-angle accuracy |
±1 mm (305 mm) (±10.0394 in. (12-1/16 in.)) |
| Spindle motor |
15 W ( DC motor ) |
| Revolution speed |
5,000 — 10,000 rpm |
| Engraving tool mounting diameter |
3.175 mm (1/8 in.) |
| Interface |
Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard) Automatic switching |
| Instruction system |
CAMM-GL II mode2 |
| Power consumption |
0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230 to 240 V |
| Acoustic noise level |
Operation mode: 70 dB (A) or less Standby mode: 40 dB (A) or less
(According to ISO 7779) |
| External dimensions |
513 mm (W) x 491 mm (D) x 217 mm (H) (20-1/4 in.(W) x 19-3/8 in.(D) x 8-9/16 in. (H) ) |
| Weight |
15.5 kg (34.2 lb.) |
| Operation temperature |
5 to 40°C (41 to 104° F) |
| Operation humidity |
35 to 75% ( no condensation ) |
| Accessories |
Power cord: 1, Dust collector hose and duct: 1, Engraving cutter: 1, Engraving-tool holder: 1, Diamond cutter adapter: 1, Hexagonal screw driver: 1, Spanner: 1, Hexagonal wrench: 1, Test material: 1, Adhesive sheet for securing material: 1, Roland Software package CD-ROM: 1, User's manual: 1 |
|
|
