| Model |
AJ-1000i |
AJ-740i |
| Printing technology |
Piezoelectric inkjet |
| Media |
width |
1220 to 2641 mm (48 to 104 in.) |
1220 to 1910 mm (48 to 75 in.) |
| Thickness |
Maximum 1.0 mm (39 mil) with liner |
| Roll outer diameter |
Maximum 250 mm (9.8 in.) |
| Roll weight |
Maximum 100 kg (220 lb.) |
| Core diameter |
76.2 mm (3 in.) |
Printing width |
Maximum 2600 mm (102.3 in.) |
Maximum 1870 mm (73.6 in.) |
| Ink cartridges |
Types |
Exclusive Roland EcoXtreme i or EcoXtreme LT cartridge |
| Capacity |
1 liter |
| Colors |
6 colors (cyan, magenta, yellow, black, light cyan, and light magenta) |
| Printing resolution (dots per inch) |
Maximum 720 dpi |
| Distance accuracy |
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater*1 |
| Media heating system*2 |
Preheater and print heater, setting range for the preset temperature: 35 to 60°C (95 to 140°F)
Heating method (Used in combination with the blower fan),
setting range for the preset temperature: 35 to 60°FC (95 to 140°F) |
| Media take-up system |
Roll outer diameter |
Maximum 250 mm (9.8 in.) |
Roll weight |
Maximum 100 kg (220 lb.) |
| Connectivity |
Ethernet (10BASE-T/100BASE-TX, automatic switching) |
| Power saving function |
Automatic sleep |
| Power requirements |
Printer: AC 200 to 240 V ±10 %, 10A, 50/60 Hz
Dryer: AC 200 to 240 V ±10 %,
10A, 50/60 Hz |
Printer: AC 200 to 240 V ±10 %, 8.5A, 50/60 Hz
Dryer: AC 200 to 240 V ±10 %, 8.5A, 50/60 Hz |
| Power consumption |
During operation |
Printer: Approx. 1600 W,
Dryer: Approx, 2300 W |
Printer: Approx. 1190 W,
Dryer: Approx, 1620 W |
| Sleep mode |
Approx, 60W |
| Acoustic noise level |
During operation |
70 dB (A) or less |
| During standby |
40 dB (A) or less |
| Dimensions (with stand) |
4299 (W) x 1115 (D) x 1413 (H) mm (169.3 (W) x 43.9 (D) x 55.7 (H) in.) |
3632 (W) X 1115 (D) X 1359 (H) mm (143 (W) X
43.9 (D) X 53.5 (H) in.) |
| Weight (with stand) |
598 kg (1319 lbs.) |
478 kg (1050 lbs.) |
| Environment |
Power on |
Temperature: 20 to 32°C (68 to 90°F)
humidity: 35 to 80 % (no condensation) |
| Power off |
Temperature: 5 to 40°C (41 to 104°F)
humidity: 20 to 80% (no condensation) |
| Accessories |
Power cords, roll shafts, end caps, spacers, media reinforcement pipe, paper tube, drain bottle, media gauge, media clamps, hexagonal wrenches, Head-unit tool, cleaning kit, syringe, tube, maintenance liquid cartridge, software RIP, Roland-PrintServer CD-ROM, User's Manual, Setup Guide, Roland-PrintServer Network Settings Guide |
*1 At Roland PET film, print travel: 1 m, temperature: 20°C (68°F), humidity: 50 %, not assured when the print heater or dryer is used.
*2 Warm-up is required after power-on. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, it may not reach a preset temperature.
| Roland VersaWorks System Requirements |
| Operating system |
Windows® 7 Professional or Ultimate (32-bit);
Windows Vista® Business/Ultimate Service Pack 1 (32-bit); Windows Vista® Business/Ultimate (32-bit);
Windows® XP Professional Service Pack 2 or later; or Windows® 2000 Service Pack 4 |
| CPU |
Core™2 Duo, 2.0 GHz or faster recommended |
| RAM |
1 GB or more recommended
(Windows7 and Vista: 2 GB or more recommended) |
| Video card and monitor |
A resolution of 1,280 x 1,024 or more recommended |
| Free hard-disk space |
40 GB or more recommended |
| Hard-disk file system |
NTFS format |
| Optical drive |
DVD-ROM drive |
|
