| Model
|
SP-540VS |
SP-300VS |
Printing / Cutting method
|
Piezo ink-jet method / media-moving method |
Acceptable media widths
|
210 to 1371 mm (8-5/16 to 54 in.) |
182 to 762 mm (7-3/16 to 30 in.) |
Printing / Cutting width *1
|
Maximum 1346 mm (53 in.) |
Maximum 736 mm (29 in.) |
Ink cartridges
|
Type
|
Roland Sublimation ink |
Capacity
|
220 cc ± 5 cc |
Color
|
Four colors (cyan, magenta, yellow, and black) |
Printing resolution (Printing dot resolution)
|
Maximum 1,440 dpi |
Acceptable tool
|
Special blade for CAMM-1 series |
Cutting speed
|
10 to 300 mm/s |
Blade force
|
30 to 300 gf |
Blade offset compensation
|
0.000 to 1.500 mm (0 to 0.0591 in.) |
Software resolution (When cutting)
|
0.025 mm/step (0.000984 in./step) |
Distance accuracy
(When printing)
|
While the print heater or
dryer are not running *2 |
Error of less than ± 0.3 % of distance traveled, or ± 0.3 mm, whichever is greater |
Distance accuracy (When cutting) *3
|
Error of less than ± 0.4 % of distance traveled, or ± 0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ± 0.2 % of distance traveled, or ±0.1 mm, whichever is greater |
Repetition accuracy (When cutting) *3*4
|
± 0.1 mm or less |
Repetition between printing and cutting *3*5
|
± 0.5 mm or less |
Media dryer
|
Heating method, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) |
Ink -fixing device
|
Print heater, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) |
Interface
|
Ethernet (10BASE-T/100BASE-TX, automatic switching) |
USB interface (compliant with Universal Serial Bus Specification Revision 1.1) |
Power-saving function
|
Automatic sleep feature |
Power supply
|
Voltage and frequency
|
AC 100 to 120 V ± 10 %, 50 / 60 Hz or AC 220 to 240 V ± 10 %, 50 / 60 Hz |
Required power capacity
|
8.8 A (100 to 120 V) or 4.7 A (220 to 240 V) |
6 A (100 to 120 V) or 3 A (220 to 240 V) |
Power consumption
|
During operation |
Approx. 1080 W (100 to 120 V) or 1230 W (220 to 240 V)
|
Approx. 470 W (100 to 120 V) or 650 W (220 to 240 V) |
Sleep mode
|
Approx. 30 W |
Approx. 29 W |
Acoustic noise level
|
During operation
|
64 dB (A) or less (according to ISO 7779) |
| During standby |
40 dB (A) or less (according to ISO 7779) |
Dimensions (With stand)
|
2390 (W) x 800 (D) x 1291 (H) mm (94-1/8 (W) x 31-1/2 (D) x 50-7/8 (H) in.)
|
1720 (W) x 770 (D) x 1275 (H) mm (67-3/4 (W) x 30-3/8 (D) x 50-1/4 (H) in.) |
Weight (With stand)
|
149 kg (329 lb.)
|
124 kg (273 lb.) |
Packed dimensions
|
2560 (W) x 830 (D) x 1035 (H) mm (101 (W) x 32-3/4 (D) x 40-3/4 (H) in.)
|
1890 (W) x 830 (D) x 900 (H) mm (74-1/2 (W) x 32-3/4 (D) x 35-1/2 (H) in.) |
Packed weight
|
200 kg (441 lb.) |
161 kg (355 lb.) |
Environment
|
Power on
|
Temperature: 15 to 32°C (59 to 90°F ) (20°C [68°F ] or more recommended),
humidity: 35 to 80 % (no condensation) |
| Power off |
Temperature: 5 to 40°C (41 to 104°F ), humidity: 20 to 80 % (no condensation) |
| Included items |
Stand, power cord, blade, blade holder, replacement blade for separating knife, cleaning kit, software RIP, manuals, etc. |
*1 The length of printing or cutting is subject to the limitations of the program or driver.
*2 At Roland SHT-1330G, print travel: 1m. Temperature: 25°C (77°F ), humidity: 50 %
*3 Not assured when the print heater or dryer is used.
*4 Provided that media length is under 3000 mm. Temperature: 25°C (77°F )
Excluding possible shift caused by expansion / contraction of the media and / or by reloading the media
*5 Provided that media length is under 3000mm. Temperature: 25°C (77°F ).
Excluding possible shift caused by expansion / contraction of the media and / or by reloading the media
