Printing technology			Piezoelectric inkjet
Media		Width	210 to 1,371 mm (8.3 to 54 in.)
		Thickness	Maximum 1.0 mm (39 mil) with liner for printing Maximum 0.4 mm (16 mil) with liner and 0.22mm (9mil) without liner for cutting
		Roll outer diameter	Maximum 210 mm (8.3 in.)
		Roll weight	Maximum 30 kg (66 lb.)
		Core diameter*1	76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing / cutting width*2			Maximum 1,346 mm (53 in.)
Ink cartridges	Type		Roland ECO-SOL MAX INK
	Capacity		220 cc or 440 cc
	Colors		Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, metallic silver and white), seven colors (cyan, magenta, yellow, black, light cyan, light magenta, white and white), six colors (cyan, magenta, yellow, black, light cyan, and light magenta), or four colors (cyan, magenta, yellow, and black)
Printing resolution (dots per inch)			Maximum 1,440 dpi
Cutting speed			10 to 300 mm/s
Blade force			30 to 300 gf
Blade offset			0 to 1.5 mm (0 to 0.059 in.)
Software resolution (when cutting)			0.025 mm/step (0.000984 in./step)
Distance accuracy (when printing)*3 *4			Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (when cutting)*3			Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater
Repeatability (when cutting)*3 *5			±0.1 mm or less
Alignment accuracy for printing and cutting*3 *6			±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media*3 *7			Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Media heating system*8	Print heater		Setting range for the preset temperature: 30 to 45°C (86 to 112°F)
	Dryer		Setting range for the preset temperature: 30 to 50°C (86 to 122°F)
Connectivity			Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function			Automatic sleep feature
Power requirements			AC 100 to 120 V ±10%, 7.9A, 50/60 Hz or AC 220 to 240 V ±10%, 4.0A, 50/60 Hz
Power consumption	During operation		Approx. 1,050 W
	Sleep mode		Approx. 14.4 W
Acoustic noise level	During operation		64 dB (A) or less
	During standby		41 dB (A) or less
Environmental	Power on		Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended], Humidity: 35 to 80%RH (no condensing)
	Power off		Temperature: 5 to 40°C (41 to 104°F), Humidity: 20 to 80%RH (no condensing)
Dimensions (with stand)			2,315 (W) x 705 (D) x 1,175 (H) mm (91.2 (W) x 27.8 (D) x 46.3 (H) in.)
Weight (with stand)			120 kg (265 lb.)
Included items			Stand, power cord, blade, blade holder, media clamps, media holder, replacement blade for separating knife, software RIP, user's manual, etc.

*1	The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use the optionally available media flanges.
*2	The length of printing or cutting is subject to the limitations of the program.
*3	Using Roland specified media, loaded correctly, temperature: 25°C (77°F), humidity: 50 %RH, all pinch rollers are used, 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. and all correction and adjustment functions of this machine have been made properly. Not assured when the print heater or dryer is used.
*4	Using Roland specified media, print travel of 1m.
*5	[PREFEED] menu item must be set to "ENABLE," 64-inch and 54-inch models, media over 610 mm wide, and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long.42-inch and 30-inch models, 3,000 mm long.
*6	Provided that media length is under 3,000 mm. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7	Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,600 mm (64-inch model), 1,346 mm (54-inch model), 1,046 mm (42-inch model), or 736 mm (30-inch model) in the carriage-movement direction. No lamination. Automatic detection of crop marks  at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE." Excludes the effects of skewed movement and of expansion and contraction ofthe media.
*8	Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.

■Roland VersaWorks System Requirements

Operating system	Windows® 7 Professional or Ultimate (32-bit); Windows Vista® Business/Ultimate (32-bit); Windows® XP Professional Service Pack 2 or later (32-bit)
CPU	CoreTM2 Duo, 2.0 GHz or faster recommended
RAM	2 GB or more recommended
Video card and monitor	A resolution of 1,280 x 1,024 or more recommended
Free hard-disk space	40 GB or more recommended
Hard-disk file system	NTFS format
Optical drive	DVD-ROM drive

■Application software compatible with Cutting and Print&Cut

Adobe® Illustrator® 10, CS, CS2, CS3, CS4, CS5, CS6 / CorelDRAW® 11, 12, X3, X4, X5